1941 Philco Pushbuttons

Description

These 3d printed reproduction push-buttons are for Philco radios from 1941.
You should put a small amount of Elmer's glue or silicone adhesive on the shafts before installing the buttons. Otherwise, they may pop off when in use. Don't use a super glue or you'll never be able to remove them later if you need to.
Dimensions: 5/8 inches long by 1/2 by 1/2 with a rectangular slot in the bottom 1/16 in. wide by 3/16 long.
Made of Nylon so it can be stained like Nylon fabric using a product like Rit dye to color or achieve an aged effect.  They also can be sanded and painted to adjust the color or level of gloss.
This is made on demand so please allow 7-10 days
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - .